SportageMotor

Kia Sportage: Intelligent Speed Limit Assist operation

Kia Sportage - Fifth generation (NQ5) - (2022-2024) - Owner's Manual / Driving your vehicle / Intelligent Speed Limit Assist (ISLA) / Intelligent Speed Limit Assist operation

Intelligent Speed Limit Assist will warn and control the vehicle by 'Displaying speed limit', 'Warning overspeed' and 'Changing set speed'.

NOTICE

Intelligent Speed Limit Assist warning and control are described based on the Offset set to 0. For details on Offset setting, refer to "Intelligent Speed Limit Assist settings"

Displaying speed limit

Displaying speed limit

Speed limit information is displayed on the instrument cluster.

NOTICE

  • If speed limit information of the road cannot be recognized, '---' sign will be displayed. Please refer to "Limitations of Intelligent Speed Limit Assist" if the road signs are difficult to recognize.
  • Intelligent Speed Limit Assist provides additional road sign information in addition to speed limit. The additional road sign information provided may vary according to your country.
  • Supplementary sign displayed under the speed limit or overtaking restriction sign means the conditions under which the signs must be followed. If the supplementary sign is not recognized, it will be displayed as blank.

Warning overspeed

Warning overspeed

When driving at a speed higher than the displayed speed limit, the red speed limit indicator will blink.

Changing set speed

Changing set speed

Changing set speed

If the speed limit of the road changes during the operation of Manual Speed Limit Assist or Smart Cruise Control (If equipped), an arrow in the direction of up or down is displayed to inform the driver that the set speed needs to be changed. At this time, the driver can change the set speed according to the speed limit by using the + or - switch on the steering wheel.

WARNING

  • If the Offset is set over 0, the set speed will change to a higher speed than the speed limit of the road. If you want to drive below the speed limit, set the Offset under 0 or use the - switch on the steering wheel to lower the set speed.
  • Even after changing the set speed according to the speed limit of the road, the vehicle can still be driven over the speed limit. If necessary, depress the brake pedal to reduce your driving speed.
  • If the speed limit of the road is under 20 mph (30 km/h), the set speed change function will not work.
  • Intelligent Speed Limit Assist operates using the speed unit in the instrument cluster set by the driver. If the speed unit is set to a unit other than the speed unit used in your country, Intelligent Speed Limit Assist may not operate properly.

NOTICE

  • For more details on function operation of Manual Speed Limit Assist, refer to "Manual Speed Limit Assist (MSLA)"
  • For more details on operation of Smart Cruise Control, refer to "Smart Cruise Control (SCC) (if equipped)"

NOTICE

The images or colors may be displayed differently depending on the specifications of the instrument cluster or theme.

    READ NEXT:

     Intelligent Speed Limit Assist malfunction and limitations

    Intelligent Speed Limit Assist malfunction A: Check Speed Limit Assist system When Intelligent Speed Limit Assist is not working properly, the warning message will appear on the cluster for se

     Driver Attention Warning (DAW)

     Driver Attention Warning settings

    Basic function Driver Attention Warning will help determine the driver's attention level by analyzing driving pattern, driving time, etc. while vehicle is being driven. Driver Attention War

    SEE MORE:

     Roof panel (Without sunroof)

    Roof front rail assembly Roof rear rail assembly Roof panel Roof center No.1 rail Roof center No.2 rail Roof center No.3 rail Roof panel (With sunroof) Roof front rail assembly Roof rear rail assembly Roof panel Sunroof reinforcement Roof center No.3 rail

     Speakers

    Repair procedures Inspection 1. Troubleshooting for Speaker  Basic inspection of speaker Inspect the sound from speaker after verifying that the speaker mounting screws are removed and the wiring connector is connected to remove any possible vibration transmitted from body trim

    Content