SportageMotor

Kia Sportage: Reverse Parking Collision-Avoidance Assist operation

Kia Sportage - Fifth generation (NQ5) - (2022-2024) - Owner's Manual / Driving your vehicle / Reverse Parking Collision-Avoidance Assist (PCA) / Reverse Parking Collision-Avoidance Assist operation

Operating conditions

After selecting Active assistance or Warning Only from the Settings menu, Reverse Parking Collision-Avoidance Assist will turn on when the following conditions are satisfied:

  • The liftgate is closed
  • The gear is shifted to R (Reverse)
  • Vehicle speed is below 6 mph (10 km/ h) (For pedestrians)
  • Vehicle speed is below 2 mph (4 km/ h) (For objects)
  • Reverse Parking Collision-Avoidance Assist components such as the rear view camera and the rear ultrasonic sensors are in normal conditions

When Reverse Parking Collision-Avoidance Assist activates, a line appears behind the vehicle image in the instrument cluster.

Reverse Parking Collision-Avoidance Assist operation

NOTICE

Reverse Parking Collision-Avoidance Assist operates only once after the gear is shifted to R (Reverse). To reactivate Reverse Parking Collision-Avoidance Assist, shift the gear from another gear to R (Reverse).

Rear Collision-Avoidance Assist

If Reverse Parking Collision-Avoidance Assist detects a risk of collision with a pedestrian or an object, Reverse Parking Collision-Avoidance Assist will warn the driver with an audible warning and warning message on the cluster. When Rear View Monitor is operating, a warning will appear on the infotainment system screen. The warning will turn off when the driver shifts the gear to P (Park), N (Neutral), or D (Drive).

If Reverse Parking Collision-Avoidance Assist detects an imminent collision with a pedestrian or an object behind the vehicle, Reverse Parking Collision-Avoidance Assist will assist you with braking.

The driver needs to pay attention as the brake assist will end within 5 minutes.

Brake control will also end when:

  • The gear is shifted to P (Park) or D (Drive).
  • The driver depresses the brake pedal with sufficient power.

NOTICE

If braking assist has lasted for approximately 5 minutes, the Electronic Parking Brake EPB will be engaged simultaneously.

Rear Collision Warning

If Reverse Parking Collision-Avoidance Assist detects a risk of collision with a pedestrian or an object, Reverse Parking Collision-Avoidance Assist will warn the driver with an audible warning and warning message on the cluster. When Rear View Monitor is operating, a warning will appear on the infotainment system screen. Braking will not be assisted.

The warning will turn off when the gear is shifted to P (Park), N (Neutral) or D (Drive).

    READ NEXT:

     Reverse Parking Collision-Avoidance Assist malfunction and limitations

    Reverse Parking Collision-Avoidance Assist malfunction A: Check Parking Safety system When Reverse Parking Collision-Avoidance Assist or other related functions are not working properly, the warning message will appear on the cluster, and R

     Limitations of Reverse Parking Collision-Avoidance Assist

    Reverse Parking Collision-Avoidance Assist may not assist braking or warn the driver even if there are pedestrians or objects under the following circumstances: Any non-factory equipment or accessory is installed Your vehicle is unstable d

     Economical operation

    Your vehicle's fuel economy depends mainly on your style of driving, where you drive and when you drive. Each of these factors affects how many kilometers (miles) you can get from a liter (gallon) of fuel. To operate your vehicle as econo

    SEE MORE:

     Components and Components Location | Front Strut Assembly

     Components Location Front axle Front lower arm Drive shaft Stabilizer bar Steering gearbox Sub frame Front strut assembly Front Strut Assembly Components and Components Location  Components

     Speakers

    Repair procedures Inspection 1. Troubleshooting for Speaker  Basic inspection of speaker Inspect the sound from speaker after verifying that the speaker mounting screws are removed and the wiring connector is connected to remove a

    Content