SportageMotor

Kia Sportage: Using the infotainment/climate switchable controlle

Kia Sportage - Fifth generation (NQ5) - (2022-2026) - Owner's Manual / Features of your vehicle / Infotainment system / Using the infotainment/climate switchable controlle

NOTICE

If you install an aftermarket HID head lamp, your vehicle's audio and electronic device may malfunction.

Using the infotainment/climate switchable controller

Using the infotainment/climate switchable controller

Press the button on the switchable controller to switch between infotainment system or climate control panel.

Press and hold the button to select the default mode for the control panel.

Switching between panels

Infotainment control panel
Infotainment control panel

Climate control panel
Climate control panel

Press the button on the switchable controller to select the desired control panel.

The selected control panel icon will be illuminated and the control panel will be changed.

  • The knob display will be illuminated according to the selected control panel mode.
  • When the vehicle is in the ACC position, only the infotainment system will be activated.

Setting the default mode

Setting the default mode

Press and hold the button to select the default mode for the control panel.

  • After the setting, the control panel will return to the default mode after a certain period of time even if the control panel is switched to the different mode.
  • If the mode is set to 'OFF', the control panel will display the mode used recently.

    READ NEXT:

     Audio system

    NOTICE If you install an aftermarket HID headlamp, your vehicle's audio and electronic device may malfunction. * If your vehicle is equipped with infotainment system, refer to a separately s

     Declaration of Conformity

    FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecti

     Driving your vehicle

    Be sure the exhaust system does not leak The exhaust system should be checked whenever the vehicle is raised to change the oil or for any other purpose. If you hear a change in the sound of the

    SEE MORE:

     Replacing license plate lamp (Bulb type)

    Turn off vehicle and disconnect the negative terminal from the battery. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing Remove the bulb by pulling it straight out. Install a new bulb in the socket. Align the lens cover tabs with the lamp housing not

     Installation - Repair procedures - Cylinder Head

    Installation NOTE Thoroughly clean all parts to be assembled. Always use a new head and manifold gasket. The cylinder head gasket is a metal gasket. Take care not to bend it. Rotate the crankshaft, set the No.1 piston at TDC. 1. Install the cylinder head gasket (A) on the cylinder bloc

    Content

    2022-2026 © - www.sportagemotor.com | Privacy Policy