SportageMotor

Kia Sportage: Side air bag

Kia Sportage - Fifth generation (NQ5) - (2022-2024) - Owner's Manual / Safety features of your vehicle / Air bag - advanced Supplemental Restraint System / Side air bag

Your vehicle is equipped with a side air bag in each front seat.

Side air bag

* The actual air bags in the vehicle may differ from the illustration.

The purpose of the air bag is to provide the vehicle's driver and/or the front passenger with additional protection than that offered by the seat belt alone.

  • The side air bags are designed to deploy during certain side-impact collisions, depending on the crash severity of impact.
  • The side air bags may deploy on the side of the impact or on both sides.
  • The side and/or curtain air bags on both sides of the vehicle will deploy if a rollover or possible rollover is detected.
  • The side air bags are not designed to deploy in all side impact or rollover situations.

WARNING

Unexpected deployment

Avoid impact to the side impact airbag sensor when the ENGINE START/STOP button is ON to prevent unexpected deployment of the side air bag.

  • The side air bag is supplemental to the driver's and the passenger's seat belt systems and is not a substitute for them. Therefore your seat belts must be worn at all times while the vehicle is in operation.
  • For best protection from the side air bag system and to avoid being injured by the deploying side air bag, both front seat occupants should sit in an upright position with the seat belt properly fastened. The driver's hands should be placed on the steering wheel at the 9:00 and 3:00 positions.

    The passenger's arms and hands should be placed on their laps.

WARNING

Deployment

Do not install any accessories including seat covers, on the side or near the side air bag as this may affect the deployment of the side air bags.

  • If the seat or seat cover is damaged, have the vehicle checked and repaired by an authorized Kia dealer.

    Inform the dealer that your vehicle is equipped with side air bags and an Occupant Detection System (ODS).

WARNING

Flying objects

Do not place any objects (an umbrella, bag, etc.) between the front door and the front seat. Such objects may become dangerous projectiles if the side airbag inflates.

WARNING

No attaching objects

  • Do not place any objects over the air bag or between the air bag and yourself.

    Also, do not attach any objects around the area the air bag inflates such as the door, side door glass, front and rear pillar.

  • Do not put any objects between the side airbag label and seat cushion. It could cause harm if the vehicle is in a crash severe enough to cause the air bags to deploy.
  • Never place or insert any object into any small opening near side airbag labels attached to the vehicle seats.

    When the air bag deploys, the object may affect the deployment and result in unexpected accident or bodily harm.

  • Do not install any accessories on the side or near the side air bags.

    READ NEXT:

     Curtain air bag

    Curtain air bags are located along both sides of the roof rails above the front and rear doors. * The actual air bags in the vehicle may differ from the illustration. They are designed to hel

     Air bag collision sensors

    * The actual shape and position of sensors may differ from the illustration. Supplemental Restraint System (SRS) control module/rollover sensor Front impact sensors Side pressure sensors (

     Air bag non-inflation conditions

    Air bags may not deploy in certain low-speed collisions where the air bag would not add any benefit beyond the protection already offered by the seat belts. Front air bags are not design

    SEE MORE:

     Installing a CRS

    After selecting a proper child seat for your child, check to make sure it fits properly in your vehicle. Follow the instructions provided by the manufacturer when installing the child seat. Note these general steps when installing the seat to your vehicle: Properly secure the child restr

     Repair method for PP bumper

    Damage to the bumper that reaches the surface of the polyporpylene cannot be fixed just by painting. Use the repair methods shown below to repair damage that reaches the surface of the polypropylene. 1. Rough cut the damaged area 45º using a knife and then sand the angle smooth. 2. Wel

    Content