Kia Sportage: Airbag Module
READ NEXT:
Description and
Operation
Description
Driver Airbag (DAB) is installed in the steering wheel and electrically
connected to SRSCM via the clock spring. It
protects the driver by deploying t
Description and Operation
Description
The passenger airbag (PAB) is installed inside the crash pad and protects the
front passenger in the event of a frontal
crash. The SRS CM determines if
Description and Operation
Description
The Side Airbags (SAB) are installed inside the front seat and protects the driver and passenger from danger when side crash occurs. The SRSCM determines
SEE MORE:
Description and Operation
Description
The 4WD ECU makes a Motor Pump (Actuator) turn round for generating an oil
pressure. And then it presses a multiple
disk clutch and transfers the generated torque into rear wheels. Its torque
value varies according to a pressure status.
Schematic
Description and Operation
Description
1. Mode
Configuration State
All sensors should be in the Low Line (Base) state.
In Low Line (Base) configuration, sensor transmissions occur every 3
minutes 20 seconds (nominal) and
pressure is measured every 20 seconds.
Normal
Driver Airbag (DAB) Module and Clock Spring
