Kia Sportage: Driver Position Memory System
Kia Sportage - Fifth generation (NQ5) - (2022-2026) - Owner's Manual / Features of your vehicle / Driver Position Memory System
READ NEXT:
Storing memory positions
The Driver Position Memory System is
provided to store and recall the following
memory settings with a simple button
operation.
Driver's seat position
Outside rear view mirror position
Driver position memory system reset
If the Driver position memory system
does not work properly, initialize the system
as follows.
How to initialize:
Stop the vehicle and open the driver's
door with the ignition switch or
SEE MORE:
Power Door Lock Switch
Repair procedures
Inspection
Driver Power Door Lock Switch
1. Disconnect the negative battery terminal.
2. Remove the front door trim.
(Refer to the BD group - "Front door")
3. Disconnect the switch connector (16 pins) from wiring harness.
4. Check for continuity between
Vehicle lift (2-Support type) and safety stand positions
1. Place the lift blocks under the support points as shown in the
illustration.
2. Raise the hoist a few inches and rock the vehicle to be sure it is firmly
supported.
3. Raise the hoist to full height to inspect the lift points for secure support.
Jack and safety stand positions
Towin
Content
- Home
- Kia Sportage - Fifth generation (NQ5) - (2022-2026) - Owner's Manual
- Kia Sportage - Second generation (JEKM) (2005-2015) - Body Workshop Manual
- Kia Sportage Third generation (SL) - (2011-2016) - Service and Repair Manual
- Sitemap
- Top articles
