Kia Sportage: Immobilizer System
READ NEXT:
Schematic Diagrams
Circuit Diagram
Description and Operation
Description
The immobilizer system will disable the vehicle unless the proper ignition
key is used, in addition to the
Replacement
Problems And Replacement Parts:
Replacement Of ECM And SMARTRA
In case of a defective ECM, the unit has to be replaced with a "virgin" or
"neutral" ECM. Al
Repair procedures
Removal
1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
3. Remove the steering column assem
SEE MORE:
Electronic stability control (ESC)
indicator light
This indicator light appears:
Once you set the ignition switch or
ENGINE START/STOP Button to the
ON position.
It appears for approximately 3 seconds
and then goes off.
When there is a malfunction with the
ESC system.
In
NOTE
Thoroughly clean all parts to assembled.
Before installing the parts, apply fresh engine oil to all sliding
and rotating surfaces.
Replace all gaskets, O-rings and oil seals with new parts.
1. Assemble the piston and connecting rod.
The piston front mark and the connecting rod
Schematic Diagrams, Description and Operation
