Kia Sportage: Power liftgate
READ NEXT:
Power liftgate(if equipped )
Power liftgate open/close button
Power liftgate handle switch
Power liftgate close button
Power liftgate open/close button
NOTICE
The power liftgate will close automatically
by doing one of the following:
When the liftgate is opened, press and
hold the power liftgate open / close
button. The liftgate will close automati
If the battery has been discharged or
disconnected, or if the related fuse has
been replaced or disconnected, for the
power liftgate to operate normally, reset
the power liftgate as follow:
Ma
SEE MORE:
Repair procedures
Inspection
1. Disconnect the ignition switch connector (B) and key warning switch
connector (A) from under the steering column.
2. Check for continuity between the terminals.
3. If continuity is not specified, replace the switch.
Removal
1. Disconnect the nega
Installation
NOTE
Thoroughly clean all parts to be assembled.
Always use a new head and manifold gasket.
The cylinder head gasket is a metal gasket. Take care not to bend it.
Rotate the crankshaft, set the No.1 piston at TDC.
1. Install the cylinder head gasket (A) on the cylinder bloc
Opening the liftgate
