Kia Sportage: Windshield Deicer
READ NEXT:
Components and Components Location
Component Location
Windshield deicer relay
Windshield deicer switch
Windshield deicer
Deicer connector
Description and Operation
SEE MORE:
Removal
1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
3. Remove the BCM (A) after removing the nuts, connectors and antenna cable.
Installation
1. Install the BCM after connecting the connectors and cab
General
1. Basically, all measurements in this manual are taken with a tracking gauge.
2. When a measuring tape is used, check to be sure there is no elongation, twisting or bending.
3. For measuring dimensions, both projected dimension and actual-measurement dimension are used in this m
Components and Components Location, Description and Operation | Repair procedures | Windshield Deicer Switch
