Kia Sportage: 4WD Control System
READ NEXT:
Description and Operation
Description
4WD ECU processes signals from various sensors and determines the current road and driving conditions. The ECU then utilizes this information to impleme
SEE MORE:
Installation
NOTE
Thoroughly clean all parts to be assembled.
Always use a new head and manifold gasket.
The cylinder head gasket is a metal gasket. Take care not to bend it.
Rotate the crankshaft, set the No.1 piston at TDC.
1. Install the cylinder head gasket (A) on the cylinder bloc
Inspection
Front Door Lock Actuator Inspection
1. Remove the front door trim.
(Refer to the BD group - "Front door")
2. Remove the front door module.
3. Disconnect the 7P connector from the actuator.
4. Check actuator operation by connecting power and ground according to
Description and Operation, Flow Diagram | Schematic Diagrams | Components and Components Location, Repair procedures
