Kia Sportage: Coupling Assembly
READ NEXT:
Description and Operation
Description
4WD ECU processes signals from various sensors and determines the current
road and driving conditions. The ECU then
utilizes this information to implem
Description and Operation
Description
The 4WD ECM controls the Pump Motor Pump (Actuator) to generating an oil
pressure. The pressure engages a multiple
disk clutch to transfer torque to th
Description and Operation
Description
The 4WD ECU makes a Motor Pump (Actuator) turn round for generating an oil
pressure. And then it presses a multiple
disk clutch and transfers the gener
SEE MORE:
Repair procedures
Removal
Rear Turn Signal Lamp
1. Disconnect the negative (-) battery terminal.
2. Remove the rear bumper.
(Refer to BD group - "Rear Bumper")
3. Disconnect the connector. Remove the rear turn signal lamp (A) after loosening 5 screws.
4. Replace the bulb (A
As a reminder to the driver, the driver's
seat belt warning lights will appear for
approximately 6 seconds each time you
turn the ENGINE START/STOP button
ON regardless of belt fastening. If the
seatbelt is not fastened, the warning
chime will sound for about 6 seconds.
If you start
to
Direct Electro Hydraulic Actuator Coupling
