SportageMotor

Kia Sportage: Multifunction switch

Kia Sportage Third generation (SL) - (2011-2016) - Service and Repair Manual / Body Electrical System / Multifunction switch

READ NEXT:

 Specifications, Components and Components Location | Repair procedures

Specifications  Specifications Components and Components Location  Component (1) <Installation order: A→B→C→D> Steering column shaft Lighting switch

 Horn

Components and Components Location  Component Location Horn switch Horn relay (Engine room compartment) Horn (Low pitch) Clock spring Repair procedures Removal 1. Remove the r

SEE MORE:

 Inspection - Repair procedures

Connecting Rod 1. Check the connecting rod end play. Using a feeler gauge, measure the end play while moving the connecting rod back and forth. End play: Standard : 0.10 ~ 0.25mm (0.0039 ~ 0.0098in.) Limit: 0.35mm (0.0138in.) If out-of-tolerance, install a new connecting rod. If sti

 Vehicle lift (2-Support type) and safety stand positions

1. Place the lift blocks under the support points as shown in the illustration. 2. Raise the hoist a few inches and rock the vehicle to be sure it is firmly supported. 3. Raise the hoist to full height to inspect the lift points for secure support. Jack and safety stand positions Towin

Content