Kia Sportage: Timing System
READ NEXT:
Components
Intake camshaft
Exhaust camshaft
Intake CVVT assembly
Exhaust CVVT assembly
Timing chain
Timing chain guide
Timing chain tensioner arm
Timi
Installation
1. Install the balance shaft chain. (Refer to Lubrication system in this
group)
2. Install the crankshaft chain sprocket (B) and the timing chain oil jet
(A).
Tightening torque:
7
SEE MORE:
To prevent the vehicle from misfiring
during dynamometer testing,
turn the ESC off by pressing the
ESC switch.
After dynamometer testing is completed,
turn the ESC back on by
pressing the ESC switch again.
1. Crankcase emission control
system
The Positive Crankcase Ventilation sy
Repair procedures
Replacement
1. Remove the rear wheel & tire.
Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
CAUTION
Be careful not to damage to the hub bolts when removing the front wheel & tire (A).
2. Loosen the bolt & nut and then remove the re
Components and Components Location | Removal - Repair procedures
