SportageMotor

Kia Sportage: Zine-galvanized steel sheet used area

Kia Sportage - Second generation (JEKM) (2005-2015) - Body Workshop Manual / Body structure / Zine-galvanized steel sheet used area

READ NEXT:

 Radiator support panel

Radiator support panel complete Fender apron panel Fender apron panel assembly Front side outer member assembly Cowl panel & Dash panel Cowl panel complete Cowl side out

 Side body panel

Front inner pillar assembly Quarter inner panel assembly Side outer rear extension assembly Quarter outer panel assembly Center outer pillar assembly Pillar outer panel assembly Side

 Roof panel (Without sunroof)

Roof front rail assembly Roof rear rail assembly Roof panel Roof center No.1 rail Roof center No.2 rail Roof center No.3 rail Roof panel (With sunroof) Roof front rail assembly

SEE MORE:

 Repair procedures

 Refrigerant System Service Basics Refrigerant Recovery Use only service equipment that is U.L-listed and is certified to meet the requirements of SAE J2210 to remove 4FC-134a(R-134a) from the air conditioning system. CAUTION Air conditioning refrigerant or lubricant vapor can irritat

 Trailing Arm | Rear Cross Member

Repair procedures  Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) CAUTION Be careful not to damage to the hub bolts when removing the front wheel & tire (A). 2. Loosen the nuts & bolts and then remove the

Content

2022-2025 © - www.sportagemotor.com | Privacy Policy