Kia Sportage: Air Conditioning System
Kia Sportage Third generation (SL) - (2011-2016) - Service and Repair Manual / Heating, Ventilation, Air Conditioning / Air Conditioning System
- General Safety Information and Caution
- Repair procedures
- Components and Components Location | Compressor Oil
- Refrigerant line | Compressor
- Condenser | Receiver-Drier
- А/С Pressure Transducer | Evaporator Temperature Sensor
- Photo Sensor | Ambient Sensor
- Cluster ionizer
READ NEXT:
General Safety Information and
Caution
Instructions
When Handling Refrigerant
1. R-134a liquid refrigerant is highly volatile. A drop on the skin of your
hand could result in localized frostbite.
When handling the refrigerant,
Repair procedures
Refrigerant System Service Basics
Refrigerant Recovery
Use only service equipment that is U.L-listed and is certified to meet the
requirements of SAE J2210 to remove
4FC-134a(R-134a) from t
Components and Components Location | Compressor Oil
Component Location Index
Engine Room
Condenser
Receiver-drier
Compressor
Expansion Valve
Service port (High)
Service port (Low)
А/С Pressure
Transd
SEE MORE:
Pressure Sensor
Description and Operation
Description
The 4WD ECU makes a Motor Pump (Actuator) turn round for generating an oil
pressure. And then it presses a multiple
disk clutch and transfers the generated torque into rear wheels. Its torque
value varies according to a pressure status.
Schematic
Preparation of assembly
Applying spot sealer
Remove paint from the surface of new parts and body to be spot welded, and
apply spot sealer for rustproofing.
Selecting a welding method
If the thickness of the area to be welded with the panels overlapped is
greater than 0.1 in (3 mm), do plug welding
using a carbon ar
Content
- Home
- Kia Sportage - Fifth generation (NQ5) - (2022-2024) - Owner's Manual
- Kia Sportage - Second generation (JEKM) (2005-2015) - Body Workshop Manual
- Kia Sportage Third generation (SL) - (2011-2016) - Service and Repair Manual
- Sitemap
- Top articles
