Kia Sportage: Body (Interior and Exterior)
Kia Sportage Third generation (SL) - (2011-2016) - Service and Repair Manual / Body (Interior and Exterior)
READ NEXT:
General Information
Specifications
Specifications
Tightening Torque
Special Service Tools
Special Tools
Troubleshooting
Troubleshooting
General Information | Front Body
General
1. Basically, all measurements in this manual are taken with a tracking gauge.
2. When a measuring tape is used, check to be sure there is no elongation, twisting or bending.
3. For
SEE MORE:
Spot welding
1. Commercial spot welding machines do not perform
as well as the machines used in the manufacturing
process. When spot welding, increase the number
of spot welds by 30% (1.3 times the original number
of welds).
2. When spot welding, weld in the middle of the joint.
Spot welding on the
Precautions For Catalytic Converter
CAUTION
If a large amount of unburned gasoline flows into the converter, it may
overheat and create a fire hazard. To
prevent this observe the following precautions and explain them to your
customer.
1. Use only unleaded gasoline.
2. Do not run the engine while the car is at rest for a lon
Content
- Home
- Kia Sportage - Fifth generation (NQ5) - (2022-2026) - Owner's Manual
- Kia Sportage - Second generation (JEKM) (2005-2015) - Body Workshop Manual
- Kia Sportage Third generation (SL) - (2011-2016) - Service and Repair Manual
- Sitemap
- Top articles
